FAQs & Support - PS2 Version

CUSTOMISATION SAVING ISSUE
You may experience an issue with Rugby League 2 World Cup Edition where your customisations may be lost.  This typically occurs after you setup your customisations and then go into a Competition, World Cup, or Franchise game. 

Your customisations will work for your new Competition, World Cup or Franchise game.  If you however start a new game your previous customisations will no longer be there with all settings resetting back to default.

There is a workaround to the problem which requires you to have 2 memory cards.  1 for your game and 1 to backup your customisations.

Please follow the procedure below to backup your customisations.

1. Insert two memory cards into your ps2 console
2. Load Rugby League 2 World Cup Edition
3. Create or customise your teams/players
4. Accept and save your customisations.
5. Quit out of the game and reboot your console making sure to remove the CD from the console.
6. Enter into the Playstation "BROWSER". You will see two memory cards.
7. Browse Memory Card 1 (on the left side of the screen)
8. Copy the RL2-WCE SETTINGS file over to Memory Card 2 (Be sure to copy the "SETTINGS" file - The file name will contain the word "SETTINGS"
9. You now have a backup of your customisations.
10. Insert the Game CD and restart the console
11. You will now be able to start a new Competition, Franchise or World Cup with your customisations in place.  You will be able to save your progress and return at anytime with your customisations intact.
12. Once you finish a Competition/Franchise or World Cup, you may want to restore your customisations back to your memory card in order to re-use them again.
13. To restore your customisations do the reverse of step 8 above.  Copy the RL2-WCE SETTINGS file from Memory Card 2 to Memory Card 1.  Overwrite the existing file on Memory Card 1 when prompted.
14. Insert the game CD and restart the Console.
15. The game should now load with your customisations back in effect.  You can now edit/change your customisations if you wish to, and start a new Competition, World Cup or Franchise Game.

Please note you will need to restore your backup settings file each time you start a new Competition, World Cup or Franchise game if you want to use your personalised customisations.

If you make additional changes to your restored customisations, you will need to update your backup by once again copying the settings file from Memory Card 1 to Memory Card 2.

Use Memory Card 1 for saving game progress. Only use memory card 2 to restore your backup when required.

Memory Card 2 can still be used for saving data from your other Playstation 2 games.

If you experience difficulties please contact support on support@trublu.com.au or 02 9533 3055

            -----------------------------------------------------

IMPORTANT INFORMATION
Rugby League 2 World Cup Edition may not work properly or may not work at all on Playstation 2 consoles which have been modified with a chip. The game will load and play correctly if the chip is switched off. The most common ways of doing this are:

Method 1 - Most modifications:

1. Put game disk into console, close tray, and switch console into standby mode using Reset button (so red light is visible)

2. Hold down the Reset button on the console until the blue light on the console shows (ie hold for about 3 seconds)

Method 2 - DMS 3:

1. Put game disk into console, close tray, and switch console into standby mode using Reset button (so red light is visible)

2. Hold down the "Square" button on Joypad 1, and press Reset button to start console. Continue to hold the "Square" button until game loads

Method 3 - DMS 4 toxic:

1. Put game disk into console, close tray, and switch console into standby mode using Reset button (so red light is visible)

2. Hold down the "L1" button on Joypad 1, and press Reset button to start console. Continue to hold the "L1" button until game loads

Method 4 - Matrix Infinity/Modbo/NH9:

1. Put game disk into console, close tray, and switch console into standby mode using Reset button (so red light is visible)

2. Hold down the "Start" button on Joypad 1, and press Reset button to start console. Continue to hold the "Start" button down until the writing "DISABLED" appears on the screen

3. Press the Reset button once

Method 5 - Messiah 1:

1. Put game disk into console, close tray, and switch console into standby mode using Reset button (so red light is visible)

2. Press the reset button to turn the machine on, and then quickly double press the Reset button again.

Method 6:

1. Put game disk into console, close tray, and switch console into standby mode using Reset button (so red light is visible)

2. Press and hold the 'Eject' button for at least 5 seconds

3. Close the tray by pressing the 'Eject' button again
    

If these methods are not successful, please contact the person who installed the chip for instructions on disabling it temporarily to play the game.

If you are still having problems, please email support@trublu.com.au or call 02 9533 3055