|
Scroll down for different platforms, cheat
codes and hidden features. If you are still having difficulties after
reading the information on this page, please call 02 9533 3055 or email
support@trublu.com.au
Running Rugby League 2 on Windows Vista
In
order to run the game on Windows Vista you need to provide
administrator rights to the game. To do this follow the steps
below.
1. Click on the Rugby League 2 icon with the RIGHT mouse
button.
2. Once the menu appears, click on 'RUN AS ADMINISTRATOR'
with
your left mouse button.
3. Click on 'ALLOW' when the security prompt appears.
The
game should now run. For subsequent running of the game, you can
start it by double clicking the icon as per usual.
PC System Requirements
PC Minimum System Requirements:
PIII 500MHz
128MB RAM
32MB 3D DirectX 8.1a compatible accelerated video card
16 Bit DirectX 8.1a compatible Sound Card
850MB of Hard Drive
Space
Windows 98SE, 2000*, ME, XP*
CDROM drive
*With latest service pack
PC Recommended Requirements:
P4 1.3GHz
256MB RAM
64MB 3D DirectX 8.1a compatible Texture & Lighting video card
16 Bit DirectX 8.1a compatible Sound Card
850MB of Hard Drive Space
Windows 98SE, 2000*, ME, XP*
24x CDROM drive
*With latest service pack
FAQs & Support - PS2 Version
IMPORTANT INFORMATION
Rugby League 2 game may not work properly or may not work at all on Playstation
2 consoles which have been modified with a chip. The game will load and play
correctly if the chip is switched off. The most common ways of doing this are:
Method 1 - Most
modifications:
-
Put game disk into console, close tray, and switch console into standby mode
using Reset button (so red light is visible)
-
Hold down the Reset button on the console until the blue light on the console
shows (ie hold for about 3 seconds)
Method 2 - DMS 3:
-
Put game disk into console, close tray,
and switch console into standby mode using Reset button (so red light is
visible)
-
Hold down the "Square" button on Joypad 1, and press Reset button to start
console. Continue to hold the "Square" button until game loads
Method 3 - DMS 4 toxic:
-
Put game disk into console, close tray,
and switch console into standby mode using Reset button (so red light is
visible)
-
Hold down the "L1" button on Joypad 1, and press Reset button to start
console. Continue to hold the "L1" button until game loads
Method 4 - Matrix
Infinity/Modbo/NH9:
-
Put game disk into console, close tray,
and switch console into standby mode using Reset button (so red light is
visible)
-
Hold down the "Start" button on Joypad 1, and press Reset button to start
console. Continue to hold the "Start" button down until the writing "DISABLED"
appears on the screen
-
Press the Reset button once
Method 5 - Messiah 1:
-
Put game disk into console, close tray,
and switch console into standby mode using Reset button (so red light is
visible)
-
Press the reset button to turn the machine on, and then quickly double press
the Reset button again.
Method 6:
-
Put game disk into console, close tray,
and switch console into standby mode using Reset button (so red light is
visible)
-
Press and hold the 'Eject' button for at least 5 seconds
-
Close the tray by pressing the 'Eject' button again
If these methods are not successful, please contact the person who installed the chip for
instructions on disabling it temporarily to play the game.
If you are still having problems, please
email support@trublu.com.au or call
02 9533 3055.
FAQs & Support - PC Version
Setting Up
PC Controllers for Rugby League 2
Most PC controllers include profiling software which allow you to set
different button assignments. When assigning functions to buttons, assign
the Rugby League 2 default keyboard functions to the desired controller
button.
For default Logitech and Saitek PC controller
configurations, click the following links:
Logitech Controller
Default Configuration Diagram
Saitek Controller Default
Configuration Diagram
A PS2 to
USB adaptor allows a Playstation 2 controller to be used via the computer's
USB port as follows:
For default PS2 controller configurations,
click the following link:
PS2 Controller (using
USB converter) Default Configuration Diagram
General
Issues
|
PROBLEM |
SOLUTION |
|
My control pad lets me move
through the menus and select
various options but it won’t let
me start a game. |
Try disabling any profiling
software that came with your
controller, the controller
should work in the game without
the need for profiling software. |
|
The sound stutters and is
sometimes crackly |
Download the latest drivers for
your sound card. Out of date
drivers can cause problems with
in-game commentary and sound
effects. |
|
My game wont load, or I get
error messages like:
"Conflict with Disc Emulator
software detected.” or
“A required security module
cannot be activated this program
cannot be executed (number)”
|
This problem is caused because
the game security has detected
cd cloning software on your pc,
or your cd is not a genuine
copy.
Firstly, check that you have a
genuine copy of the game.
Secondly, disable any cd
cloning/emulator software that
you may have running on your pc.
Examples of emulation software
include “Clone CD”, “Alcohol
120%”, “Daemon Tools”, or
“Paragon CD Rom Emulator”. To
disable these tools, right click
on the program icon in the
windows desktop taskbar, and
then click on “exit” or “close”. |
|
The video scenes won’t play
correctly, the colors are
blocky, or my game performance
is jerky and slow. |
Download and install the latest
drivers for your video card.
Most video related problems are
caused by old and outdated video
card drivers. If the new drivers
don’t improve the game
performance, select a lower
graphics setting in the game
options |
|
When I try to load my game I get
a directx 8.1. error and the
game shuts down. |
Download and install the latest
drivers for your video card.
This is caused by an issue
between your video driver and
direct X. |
Online Issues
|
PROBLEM |
SOLUTION |
|
When I try to login to play
online the game seems to freeze. |
The game is most likely being
blocked by your firewall
software. Hold down the ALT Key,
and then Press Tab (while
holding down the ALT key) to
cycle into any background
applications that may be
running. Check that your
firewall software has not popped
up asking you to grant internet
access to the game. If there is
a popup from your firewall
software, set it to allow access
to the game. |
|
Online performance is really
slow and lags during game play. |
For best game performance we
recommend a minimum of 128k
upload/download speed. For
optimal online gaming it is
recommended that the player with
the fastest internet connection
creates the match and hosts the
player with the slower
connection. |
Additional PC Support
If you are still having difficulties
playing the game, contact support at
support@trublu.com.au
To help us solve your problem, please
provide details of your pc’s
specifications and driver versions. To
obtain your pc’s details follow the
steps below:
-
Click on “START”
-
Click on “RUN”
-
Type in DXDIAG
-
Click on “OK”
-
Once the DirectX diagnostic tool
loads, click the “Save all
Information” button and save all the
information to a file.
Please attach the file to your email
along with a clear description of your
problem.
Cheat
Codes & Hidden Features
There are currently no cheat codes or hidden features available. Please check
again closer to the release date. |
